Many housewives appreciated the benefits of cooking in a cast iron pan. But such dishes are not equipped with a non-stick coating that is fashionable today, and troubles happen with it: it happens that instead of a beautiful dish it turns out to be very fried, or even completely burnt, foods. But there are small secrets that will help permanently fix this problem. Today we will talk about why a cast-iron frying pan sticks, what to do and how to get rid of it.

Causes

If your kitchen assistant began to burn, it means that mistakes were made in its use:

1. With a new pan, improper preparation of its operation is possible.
2. Mistake in the care of dishes, which has been serving for more than one year. If it was washed or stored incorrectly, it will certainly begin to burn.

The solution in any case is very simple: it is necessary to calcine the cast-iron product and then grease the entire frying surface with oil.

Why bake a pan?

Cast iron is a solid material with many pores visible to the naked eye. Both the oil necessary for frying and the water causing unpleasant consequences can equally easily get into these pores.

If you just purchased a new cast-iron frying pan, remember that it needs preliminary preparation. The dishes must be washed and set to bask on the stove.

Important! Thus, all unnecessary chemistry that could be used to create the dishes will come out and burn out of it. Also, annealing will help create a kind of film on the dishes, thanks to which the food will not burn.

Calcination Benefits:

• All dirt that gets on it from the store and from production is removed from the dishes.
• Get rid of odors.
• Create a homemade non-stick coating
• Protection against rust and corrosion.

Accordingly - as a completely new dishes, and one that does not need to be used for a long time must be calcined.

How to burn a pan?

A cast-iron frying pan has been serving the hostess for several decades, it is reliable, retains heat for a long time and it is very convenient to cook on it. But if the cast-iron frying pan sticks, you should do the following:

1. Clean the inside of the dishes from burnt food.
2. If the first time it was not possible to remove all the impurities, you can pour a little water into the dishes, add soda, and boil the solution for 3-5 minutes. After - the water is cooled, drained and the surface is again cleaned.
3. Next, the pan is washed with cold water and left to dry.
4. After drying, salt about 1 cm thick is poured into the pan, and it is calcined over a fire for about half an hour.
5. Then the pan is allowed to cool, the salt is removed and its entire surface is lubricated with vegetable oil. You can choose from sunflower, olive, linseed or any other oil.

Important! Lubrication allows you to create a film on the dishes that penetrates into the porous material, which protects the surface from burning.

There are several nuances that should be taken into account by all the housewives who are wondering: what to do so that the cast-iron frying pan does not burn.

First question

The first thing the housewives are interested in is which layer of salt needs to be poured in order to successfully calcine the pan? Salt is needed to extract all dirt and moisture from porous cast iron, so do not skimp. The layer should cover the entire bottom of the dishes, at least half a centimeter.

Important! So that the salt does not burn, it should be mixed after heating. To do this, you can use a wooden spatula.

After you have calcined the pan, the salt is removed. To do this, take a soft, dry cloth or napkin.

Important! Cast iron cools very slowly, but you need to be patient and wait for the utensils to cool completely. Otherwise, you can get burned.

Second question

The next question, which should be discussed in more detail - on what to calcine a cast-iron pan so as not to burn. The most convenient thing is to calcine it in the oven, but this method is not available to most modern housewives. Therefore, you can use the oven or take the dishes with you to nature and ignite it at the stake.

Important! In extreme cases, you can do this on the stove, only in this case, you must definitely well ventilate the kitchen during and after processing the dishes.

1. When baking in the oven, oil lubricates not only the inside but also the outside. And then not to wash the entire oven from oil smudges - they cover the bottom with foil or put a baking sheet.
2. If you use dishes for frying pancakes - before cooking, well grease it inside with vegetable oil, then heat it and then proceed to cooking.

Do not forget about the proper care of the dishes. Then it will definitely serve you for a long time and will not make you worry about burnt food.

Care

If a cast-iron frying pan sticks, it is most likely that the reason is precisely in the wrong operation. Consider the basic recommendations for the care of cast iron. So that food does not burn to the dishes, it is enough to follow a few simple rules.

Rule 1

Do not wash the pan with hard brushes or abrasive powders. This type of handling will inconspicuously cause the products to stick. If fat remains on the surface, you can remove it with a soft cloth or napkin. If there is sticky food, the pan is soaked with soda or detergent for several hours.

Rule 2

Storage of cast iron utensils must be dry. After washing, it can be dried on the stove. If water remains on the dishes, this will lead to the appearance of rust, and cooking in such a pan becomes not only uncomfortable, but also dangerous.

Rule 3

A cast-iron pan obliges you to use it as often as possible. With constant use, it is lubricated with oil, and its surface is less susceptible to corrosion, and food does not stick.

Important! If you have not used the cookware for a long time, wash it and bake it before cooking.

If your dishes are not new, and damaged by soot or rust, you need to clean them. How to do this, we will consider further.

We clean the pan

The two main problems faced by users of cast iron cookware are soot and rust. Methods for cleaning these contaminants are simple, but differ from each other.

Nagar

There are many ways to clean the pan from soot. Consider the main ones.

Vinegar and salt

Salt and vinegar will help us to clean pig iron from soot:

1. They must be mixed so that a porridge mass is obtained.
2. Homemade cleaner should be applied to the sponge and rub the dirt on the inside of the dishes.
3. The outer part can be treated with special chemistry from soot or vinegar.
4. After the procedure, the pan is washed and dried on the stove.

Important! If the deposit is very strong, cleaning may take several days, while the product is soaked in a cleaning solution.

Soda, glue and soap

Another option if the cast-iron pan burns:

1. Mix 0.5 kg of soda, two bottles of stationery glue, a cut piece of laundry soap.
2. The whole mixture needs to be mixed with water, placed in a large pan so that it covers the entire pan.
3. Next, the pan is set to heat, wait for boiling and separation of soot.
4. After - the pan is taken out and washed, cleaning the non-descended soot mechanically.

Important! The same method can be used without glue and soda, it is enough to prepare a stronger solution of laundry soap.

Calcination

Another option is to bake the pan over an open fire. But if there is no way to get to the site or into the forest - this method can be upgraded to home. For this we need an oven:

1. Cover the baking sheet with foil.
2. Lay the dishes upside down on it.
3. Set to bask for 2 hours at 250 degrees.

Important! With home-baking, heavy smoke is possible in the room, so before starting work, open all windows, and if there is a hood, turn it on.

How to remove rust?

In order to remove the rust, the hostesses also came up with many options. Let's talk about a few.

Important! If you notice traces of rust on the dishes, do not hesitate, because when it comes into contact with food, it releases substances hazardous to humans, which can result in serious health consequences.

First way

We mix vinegar and water 1: 1, soak the pan in this solution for 2-3 hours. After - we clean it with a mushy mixture of salt and vegetable oil.

If there is old rust, this method may not work. Need more “strong artillery”.

The second way:

1. First, the dishes are well cleaned with Pemolux type powder.
2. Next, use a metal brush.
3. If there are still traces of rust in the pan after such a strong impact, you can use sandpaper.
4. After all work, the pan is thoroughly washed and dried.

Third way

Also, experienced housewives are advised to make a kind of non-stick coating for dishes. To do this, it is well lubricated with vegetable oil and calcined in the oven at 180 degrees for about an hour. After - the dishes are allowed to cool and the remaining fat is spread with a napkin. The coating is created due to the fact that the porous material is clogged with oil, and does not give water and a chance to get inside.

In skilled hands, the food on cast iron always turns out to be tasty, and so that it does not burn out, use simple rules of care and tips on what to do so that the cast-iron frying pan does not stick. Delight yourself and loved ones with new dishes every day!

If you don’t stick to the pan while frying, then you just never fried.

Vegetables and fish, for example, are guaranteed to stick to almost any pan, if you do not follow some rules, which many do not even know about.

In general, there is a certain pattern in what food sticks to the pan and why, as well as several simple ways to help avoid this.

However, do not panic if the chicken breast or cutlets still stick to the pan, because the situation can always be fixed, and we will share with you all the main secrets.

WHY FOOD STICKS

It is important to understand that certain chemical processes occur during the roasting process, as a result of which the molecules on the surface of the food and in the hot pan react. This is an absolutely natural process that has nothing to do with your culinary skills, so you should not blame yourself for curvature.

But we will not bore you with an accelerated course of chemistry, but simply say that high-protein products, such as meat or fish, stick to the pan more strongly than vegetables. It is easier to deal with sticky vegetables, but more on that later, but for now let's talk about the relationship between the pan and the degree of adhesion of products to it.

TO WHICH PAN FOOD LESS STICKS LESS

Of course, the non-stick pan will be the safest option for beginners in cooking.

Just do not think that you need to fry on it completely without oil, because this is not so.

It is necessary to add oil, only in the case of a non-stick frying pan you can literally use a drop and not really monitor what temperature it has warmed up to.

Cast iron pan must be calcined and greased. Yes, just lubricate. The oil should penetrate into all pores and cracks, forming an absolutely smooth surface to which the food no longer sticks.

But the hardest thing is to fry in a steel pan. It quickly but not always evenly heats up, and even if everything is done correctly, food can still stick. To cook in a steel pan, you will need more oil, and here it is especially important to warm it thoroughly.

HOW TO AVOID ADHESIVE FOOD IN A PAN

The easiest way to avoid food sticking to the pan is to use oil. You may have noticed that cold oil is quite viscous, and when heated it becomes more fluid, which allows it to fill all microcracks on the surface of the pan and reduce the contact area of \u200b\u200bthe food itself with the pan.

The first rule follows from this - always heat the oil. It should practically smoke, but still not boil. As soon as you put the product in a preheated pan, the temperature of the oil will drop instantly, so remember that it is best to always fry in a pan with a thick bottom and not save oil, especially when it comes to a steel pan.

Try to fry food in small portions to avoid improper roasting and sticking. This, of course, will take a little more time, but the likelihood that you will get a beautiful dish with a delicious golden crust is much higher.

And one more secret: blot food with a paper towel before frying. This simple way will help remove excess moisture and facilitate the frying process.

Remember, at the very beginning, we talked about the fact that the fish due to its molecular structure is guaranteed to stick to the pan during frying?

It's time to talk about a very simple way to avoid this. By the way, it is suitable not only for fish, so take note.

Before you start cooking, cut a circle from the parchment along the diameter of the pan, put it on the bottom, and then heat the pan, pour oil and fry, as usual. Favorite food will no longer stick.

WHAT TO DO IF THE FOOD IS ADHESIVE TO THE PAN

Even if you did everything according to the instructions, food may stick. But do not panic.

If at the first moment a piece of meat or chicken breast is stuck, then it is highly likely that as soon as these products are slightly browned, they themselves will stick out. You can also swing the pan a little to speed up the process, or move the pieces when frying with cooking tongs.

Vegetables begin to stick much faster than other products, so the best way to save the situation is to mix them regularly at the very beginning of cooking and use more oil.

But in the case of cutlets, it is better to add not oil, but a little water. You won’t be able to get the same treasured crust, but your appearance will not suffer.

If you often cook an omelet, but it constantly sticks to you, then try to first raise the edges with a spatula, and then swing the pan, as in the case of meat.

But when frying pancakes, nothing better than lubricating a hot pan with oil was not invented. The first pancake is lumpy only because the pan has not warmed up enough at this point.

This moment is familiar to everyone who at least once tried to fry cutlets, pancakes, fish, chops or something else in a pan without a non-stick coating. First, everything goes according to plan - you heat the pan, add oil, then start frying, and at the moment when it is time to turn the food over to the other side, you understand that it has stuck tightly. In the best case, you still manage to turn your chicken breast, cutlet or what you fry there, pretty much ruining its presentation, in the worst - panic while your failed dinner, sticking to the pan, quickly turns into coal ...

Yes, I, as always, exaggerated a little, but everyone who has come across this situation knows that this is not at all funny. Well, in this case, you should be encouraged by the idea that what happened is a completely rational explanation, which means that the next time this can be avoided. In this article, we will understand why food can stick to a pan, and what to do if it happened to you. So,

Why is she sticking ...

Read also:

At the very beginning, a reservation must be made: not all pans are equal. Modern frying pans with non-stick coating, for example, have not heard of the sticking problem at all, because they were invented precisely for this - so you can fry cutlets, fried eggs and fish, without thinking about how to tear them off the pan. Cast-iron frying pans are another matter: they are specially calcined with the addition of oil, which fills the microscopic pores in the metal, forming a smooth coating, to which, if everything is done correctly, the food no longer sticks. Thus, the main record sticks for food sticking are stainless steel pans.

A steel pan is a great thing. It is coarse, not too heavy, its material does not react with acidic products (as copper does, for example), it heats up relatively quickly, and with the proper skill, absolutely any dish on it will turn out perfectly perfect. A stainless steel frying pan, however, does not always warm evenly, but this problem has already been solved by making multi-layer pans with the addition of various alloys. Thus, its only drawback is excessive stickiness.

So why does food stick to a pan?

Here chemistry comes into play (in the sense of science, and not the one that everyone thought of). Perhaps you did not go through or completely forgot what Van der Waals forces are, but you are sure to remember that high temperature accelerates all the chemical processes that occur around us. The cutlet could also stick to a cold pan (if they had both lived long enough), but in a hot pan this happens almost instantly. Between the molecules on the surfaces of the food and the pan fairly strong bonds are formed, tightly - and your cutlet holds like glued! Foods with a high protein content are especially firmly attached to the pan, since proteins form compounds with iron atoms on the surface of the pan, and because of the structural structure of the fish in general and its protein structure in particular, it is the fish that sticks to the pan most strongly.

…and what to do with it?

The easiest and most logical way to avoid food sticking to the pan is to place something between them that can separate them. There is one witty and simple way that I use if I want to get fried fish with crispy skin that I don’t have to tear from the bottom of the pan. Take a sheet of parchment, fold it in half, then again, and then fold the paper two and a half times so that the fold line always goes through the corner that marks the center of the large sheet. Attach this corner to the center of the pan and cut the paper a little earlier than the walls of the pan, turn around - and you get a piece of parchment of conditionally round shape with a diameter slightly smaller than the bottom of the pan, which is called the word "cartouche". Place it in a pan, add oil and fry the fish, pressing it with a spatula to the bottom.

Everything ingenious is simple, isn't it? This technique can be used not only for frying fish, but also in other cases when you are afraid that your food will burn, but frying should not be too long.

But stop! In fact, we always put something between the food and the bottom of the pan that is quite capable of preventing them from sticking. This thing is called "butter."

Read also:

Indeed, the correct use of oil during frying is able, if not completely eliminated, to significantly reduce the risk of food burning, and the key to this, again, lies in choosing the right temperature. The fact is that cold oil has a higher viscosity than hot oil. When heated, it becomes more fluid, which is easily noticeable even to the naked eye, and penetrates into those microscopic pores at the bottom of the pan, filling them and thereby reducing the area of \u200b\u200bcontact of food with metal. But the main trick here is that the oil is able to heat up to a temperature significantly higher than the boiling point of water.

Oil is your friend and helper

What happens to food - the same cutlet or a piece of chicken - after it is added to a pan with hot oil? Heat instantly evaporates moisture from its surface, turning it into steam. But since a piece of chicken is in the pan, the steam cannot simply escape, and it lifts the product a little - it turns out to be something like an air cushion, which forms a layer between food and metal, and prevents their interaction. The problem is that both the food itself and this steam have a temperature much lower than the oil, cooling it, and if the oil was not enough (or you did not let it heat properly), its temperature will drop lower than necessary to evaporate the water, coming out of the product - and that’s it, write it is gone.

Thus, the oil should always be heated properly, almost to the point of smoke, but still not allowing it to smoke - and the amount of oil should be sufficient so that its temperature is maintained at the required level.

Are you afraid you have to use too much oil? You are rightly afraid - but there are tricks, knowing which, you can reduce the amount of oil.

First, use a pan with a thick bottom - it holds heat well, and will heat the oil, which tries to cool insidious food.

Secondly, when possible, fry food in parts - even if it takes a little longer, but they will not crowd in a pan and fry properly.

Finally, before frying, blot food with paper towels to remove moisture from its surface: the less water, the less energy is needed to evaporate it, which means less oil is also needed.

If the food still sticks

Perhaps such. Yes, I know that you did everything exactly as described above, but there are too many variables in the equation, and your eye is not a high-precision device, and you just want to make dinner without pretending to be a Nobel in physics (at least not in this moment).

At all times, housewives fought with food burned to the bottom of the dishes. Especially often this problem occurs with pans. A little more than 10 years ago, Teflon-coated samples hit the market, which seemed to be a salvation from such a disaster. This material was especially appreciated by fans of a healthy lifestyle, because the operation does not require the addition of oil. Nevertheless, the problem of burnt food still remains relevant, and modern housewives still share cleaning methods if a pan burns. But why is this happening, because in the courtyard of the 21st century, technology has reached incredible limits in the production of dishes and the means to care for it.

Regardless of the material from which the pan is made, there are several main reasons for its damage:

• low-quality frying pans - samples of proven companies with non-stick coating, on the recommendation of the manufacturer, can be used no more than 2-4 years. What can we say about fakes or cheap dishes? When consumers seek to save money by buying frying pans at an extremely low price, they do not understand that their use is reduced by several times. Thus, a cheaply bought non-stick pan will be suitable for only 2-3 months. After about this time interval, the food begins to stick;
• improper use of the pan also causes mechanical damage to its surface. It does not matter, ceramic dishes, with Teflon coating, cast iron or made of other material, it is not able to withstand improper handling. It is important to follow the recommendations for use given by the manufacturer, read on the Internet, otherwise in the near future the dishes will become unusable.

To eliminate the causes of food burning in a pan, you should choose only high-quality samples and follow the rules for operation, care and storage.

How to clean a burnt pan

If it was not possible to save the dishes, you should study cleaning methods that differ depending on the material from which it is made. And the sooner you do this, the easier it will be to remove carbon deposits. Long-term use of a pan with carbon deposits leads not only to a deterioration in the quality of food, but also to an increase in the layer of stale fat. In the future, it will become more difficult to clean the pan, or you will have to completely throw it away.

Cast-iron pan

In such a frying pan, the most delicious pancakes are obtained, but only if the poured dough does not stick. To prevent this from happening, it is important to take action immediately.

1. Once burning has occurred, remove the food from the pan until it is still more attached. On a dry bottom, pour 2 tablespoons of salt and pour 100 ml of vinegar. Put the frying pan on the fire and wait until the mixture boils. Then pour the baking soda in the same volume as the salt, keep it on fire for another 10 minutes. Allow to cool, and then wash in the usual way.
2. If you just purchased a cast-iron skillet, you can create a non-stick layer - fill the bottom with salt and put in the oven. Soak for an hour, and then remove the salt and wipe the dishes with vegetable oil.

If even after that a cast-iron frying pan burns, boil it with citric acid dissolved in water (1 tbsp.spoon per liter of liquid).

Aluminum pan

It is not difficult to remove burnt fat from such dishes: pour water into a deep container and add silicate glue and soda in the proportions of one tablespoon per liter of water. This solution should be put on the oven and boiled, and then lower the pan there. Usually half an hour is enough for the burnt food to go away. Then it is enough to rinse the pan with water with a sponge using a regular detergent.

There is another way - the removed skin from sour apples is poured into a pot of water, boiled, and then also lowered into a frying pan. Boiling for an hour completely removes carbon deposits due to the acid released from the fruit peel.

Ceramic pan

It’s a little harder to clean a burnt ceramic pan. Such dishes are especially appreciated by the hostesses, as they are environmentally friendly, cooking also does not require the addition of oil, and the food is tasty and of high quality. But in operation, ceramics is far from the simplest material, so often the housewives are faced with the need to remove burnt food from its surface.

There are several cleaning methods that allow you to remove burnt oil and other food from a ceramic pan, you need to choose based on the degree of contamination.

1. Small areas of contamination are easily removed with a cloth or sponge soaked in olive oil.
2. If the pan is very sticky, draw hot water into it and add a few drops of dishwashing detergent. Leave on for half an hour or an hour, after which just wipe with a soft sponge.
3. Large spots of burnt fat can be removed with ethyl alcohol - blot a cloth with it and thoroughly soak the dirt. Then wipe and wash the pan in the usual way.
4. Even more old and large-scale burnt places can be cleaned with household detergents for washing the stove. To do this, it is necessary to treat the surface to be cleaned with gel or foam (only not with powders), leave for 15-20 minutes and rinse thoroughly under water.

Stainless steel

You can remove the burnt layer in a stainless steel pan with salt - densely cover the area and leave to “salt” for 2-3 hours. After rinse with water, and if necessary, rub with a sponge. Many housewives fill the pan with saline, but this is not recommended, as a result, yellow stains will remain on the dishes.

If the pan is burnt, it is better to wash it immediately. If it does not rub well, boil water with soda in it (1-2 tablespoons). As a rule, this is enough to remove carbon deposits.

Non-stick

There are several ways to wash a burnt pan with a non-stick coating:

1. Boil the dishes in a solution of water and detergent, based on the proportion: for 1 liter of the first component, 10 ml of the second. After rinse under running water.
2. Make a solution of 3 liters of water, 150 ml of silicate glue and 200 gr. soda. Boil it and lower the pan there, and after 30-40 minutes rinse.
3. Wash the pan several times in the dishwasher, and then, if necessary, wipe with a sponge.
4. Use sanitary gels for plumbing - their components fight various types of pollution.

In all cases, it is important to start acting as early as possible - the older the burn, the more time and effort you will have to make.

It is also important to remember - never rub pans with soda or other abrasive substances. Modern manufacturers cover even the most resistant materials with protective layers that are easy to destroy by rubbing the dishes once with a brush or abrasives.

Calcination of the pan: 3 ways

If you notice that everything sticks to a cast-iron pan, then you can’t do without its calcination. You can use one of three methods for this: conventional calcination, with salt or with vegetable oil.

Method 1. Normal calcination

This is one of the easiest and most expensive ways, because its price is just a little of your time.

• Preheat the oven. Let it warm up to 200 degrees.
• Put the pan in the ovenin need of processing.
• Wait 3 hourswithout changing the temperature regime.
• Turn off the oven  and wait for the pan to cool.

After such a treatment, the exclamations of “burning potatoes” will be forgotten like a nightmare.

Method 2. Calcination with salt

In order not to burn a cast-iron pan, you can use ordinary table salt.

• Wash the pan  and wipe it dry.
• Pour salt onto its surface. Do not be afraid to overdo it, the salt should cover the bottom of the pan with a layer of at least 1 centimeter.
• Calcine the product. This can be done on the stove or in the oven, the main thing is that the procedure does not take less than one hour. Remember to stir the salt periodically.
• Remove any remaining salt.and grease the surface of the pan with vegetable oil.

This option is also suitable if pancakes are burnt in a special pancake pan, which is very picky in care. Remember to always thoroughly heat the product before baking.

Method 3. Calcination with oil

To care for cast-iron pans was complete, an additional protective layer must be created on their surface. In this case, vegetable oil is the best help.

Instruction:

• Preheat the ovenlet it warm up to 220 degrees.
• Put the cast iron in the ovenwait until it heats to the same temperature.
• Take out the pan  and grease its surface with vegetable oil. Be very careful not to get burned.
• Put the product back in the oven.
• Wait until the oil burns out..
• Turn off the stove  and let the product cool in it.

Pan cleaning: 4 products

In order not to encounter a problem in which the cast-iron frying pan burns, you need to know how to clean it properly. I’ll give you some simple recipes:

Illustration	Instruction manual
	Remedy 1. Citric acid If the pan is burnt due to oil or from improper cooking, citric acid will come to the rescue: Wash the product under running water. Sprinkle its bottom with citric acid. Wait 4–5 minutes until the acid is absorbed into the porous structure of the cast iron. Remove acid residues with a damp sponge and rinse the dishes.
	Remedy 2. Mustard Powder Another option is how to care for a cast iron surface. He will cope with even the thickest layer of fat: Heat the remaining fat to melt it. Discard the resulting liquid. Sprinkle damaged spots with mustard powder. After 25 minutes, rinse the product thoroughly under hot water.
	Means 3. Baking soda and table vinegar With your own hands you can create an effective cleaning agent that is perfect for cast iron surfaces: Mix soda with vinegar in equal proportions. The resulting paste rub the entire surface of the dishes. Wait 30 minutes. Remove carbon deposits with the hard side of the sponge.
	Means 4. Soap and glue Not sure what to do to remove leftover food? Take advantage of the old proven method: Prepare a large container in which your pan can fit. Pour water into a saucepan and boil it. Grate a bar of laundry soap and pour chips into boiling water. Add the contents of a small tube of PVA glue to the solution. Dip the pan into the liquid and boil it for two to three hours. Rinse the cast iron in water. After that, dry the dishes without fail.

The main answer to the question why a cast-iron frying pan burns is considered improper care of it. To prevent damage to the product, you must follow simple rules.

• Do not wait until a thick layer of carbon deposits forms in the pan.. It has a bad effect on its operation.
• Clean the product regularly. Dry the pan every time after cleaning.
• Store the items correctly. Cast iron products are best stored in a dark, dry place, where the risk of corrosion is minimal.

Summarizing

I told you how to wash a cast-iron pan and how to prevent food from sticking to its surface. You just need to choose a method to taste and try it out in practice. You will find more detailed instructions in the video in this article, and if you still have questions, you can ask them in the comments.