The creator of books about transurfing, Vadim Zeland, pays a lot of attention to proper nutrition. Frankly speaking, the further, the more. And one of the most important components of this diet is specially prepared water. Living water.

The first method (cheap, but long)

For the first time, a description of the process of preparing living water was given in the book “The Maker of Reality.”

The process consists of several stages.

1. Ordinary tap water settles for several hours. The water settles in an open vessel to remove chlorine. 5 liters of water are taken, part of it will be “rejected” during the preparation process.

2. Then you need to boil water in a regular enamel pan. You need to boil water with a “white key”. This means that it needs to be high fire bring to education large quantity small bubbles, and have time to turn it off before large ones appear.

3. The water needs to be cooled, and quickly. You can dial cold water in a large basin or even a bathtub, or in winter take it out onto the balcony, or even better - put the pan in a snowdrift.

4. Then the water is infused on flint for 2 days. Black flint is recommended for infusion. Amount of flint per specified quantity water – 5-7 pebbles. There is no need to cover the pan with a lid; just cover it with gauze. At the end of the infusion, the water is carefully drained. At the same time, there is no need to use the bottom layer, 3-4 centimeters, because harmful impurities are concentrated in it.

5. Then the water freezes. The second of the methods described in the article Preparation of melt water is used. Namely: water in metal pan placed in the freezer, after the first ice has formed, it is thrown away and the water is poured into plastic container. Why plastic? To prevent the enamel on the pan from cracking.

The water is allowed to freeze by about 2/3, then a hole is made in the resulting layer of ice to drain some of the water, which contains salts.

The remaining ice is melted at room temperature.

6. The water is almost ready. On final stage Can pass it through a magnetic funnel to secure the structure.

Living water is ready. It retains its properties for 7 hours.

As you can see, this is a rather complex scheme. And a lot of time is spent preparing such water.

This recipe is on video:

Subsequently, through the use various devices, the process has been simplified.

2. Water is infused with shungite and flint. You can also add rock quartz;

3. The water is activated by the “Living and Dead Water” device (electric activator);

4. Water is structured using an aquadisc or Koltsov functional state corrector (KFS).

The sequence of actions should be exactly like this. And you cannot skip any of the stages. Zealand clearly distinguishes between activation and structuring - these operations give water completely different properties.

Only pre-prepared (purified and slightly mineralized) water should be activated. Activating tap water, according to Zealand, is useless or even harmful.

And, since the structure of water is destroyed during the process of electroactivation, structuring should be the last step.

What's good about this system? Because it is precisely a system. All stages of preparing healthy water are clearly described and explained. Whether these explanations are considered sufficient is a personal matter for everyone. But in general, this method of preparing healing water should be of interest not only to transferrs, but also to everyone who cares about their own health.

How to use this living water? You need to drink it. As you know, a person should drink about 2 liters of water per day. Moreover, it should be water, and not tea, coffee or compote. If drinking water will be prepared according to any of the given recipes, the body will be cleansed, and many diseases will go away.

Learn more about the effect of this water in the video.

The age of technological progress leaves its mark on modern man. More and more people are using filters or built-in systems for water purification. As a rule, such equipment is quite expensive, for these reasons experienced housewives looking for alternative options. One of effective ways purification is considered to be the preparation of “living” (structured) water. According to its characteristics, the composition is a melt liquid without heavy impurities.

Method number 1. Freezing in pans

1. As a rule, preparing “living” water is not particularly difficult. At first the process may seem impossible, but over time you will get the hang of it.
2. Running water contains isomers and heavy impurities. One of the “pests” is considered to be deuterium, a component that makes water heavy. It freezes very first (temperature regime is about 3.7 degrees).
3. Next, light isomers, which are also found on the surface, freeze. Temperature for freezing them varies between 1-1.2 degrees. For human body The most useful are water molecules that freeze at a temperature of -1-0 degrees.
4. To start cooking, purchase bottled water or run the liquid through a household filter. Pour the water into a saucepan and put it in the freezer. When a thin crust of ice forms on the surface, this means that deuterium has frozen. The liquid has reached a temperature of 3.7 degrees, you need to get rid of this crust of ice.
5. Pour the remaining water into the second pan and place it in again. freezer. The liquid will begin to solidify, wait until 2/3 of the total volume of water freezes. Ultra-light isomers will remain in the inner part, which are not beneficial for the human body. Get rid of the liquid concentrated inside, it contains all the impurities.
6. The remaining 2/3 of the ice is “live” water, which is optimal for human consumption. Melt it under natural conditions, pour into a clean bottle, and store in the refrigerator for no longer than a day. Drink one glass before or during meals.

Method number 2. Freezing in glasses

1. If you don’t have the time or desire to bother preparing water in two stages, do it differently. Prepare several glass or ceramic glasses and fill them with filtered water. Step back from the edges of the dishes by 1.5-2 cm.
2. Place containers with liquid in the freezer and wait until completely hardened. After this, remove the prepared ice from the glasses/mugs, rinse the block under the tap with cold water. This way you will get rid of heavy impurities that harden first.
3. Place the ice that you have already rinsed into a deep bowl. Let melt by 2/3. In the middle you will be left with a small piece of ice, similar in size to Walnut. Discard the middle (unmelted piece), it contains salts and metals.
4. Melted ice is nothing more than structured water. To make it more useful, place the bowl on the windowsill and leave it in direct sunlight. After 15 minutes, start pouring water from one bowl to another to fill it with oxygen.
5. The prepared liquid retains useful qualities within 24 hours if stored at a temperature of 7-10 degrees. When heated, the composition loses its precious properties and becomes unusable (“dead water”).

Method No. 3. Freezing in a container

1. If you prepare structured water using this method, you will see that the liquid has become crystal clear. This indicates the complete removal of heavy metals and salts from the water structure. The technique is suitable for those who want to freeze water for a large family.
2. Prepare a two-liter plastic container for storing food or heating dishes in the microwave. Fill it with water, retreating 2 cm from the edges. Wait for the liquid to harden, usually 10 hours.
3. You need to freeze ¾ of the composition, in the core of the container you will see unfrozen liquid, it needs to be removed. To do this, heat a knife over a fire or lighter and pierce a block of ice. Pour out the “dirty” water and let the remaining ice melt.
4. Open the freezer periodically and make sure that the ice does not freeze completely. Thanks to such manipulations, salts and impurities will accumulate in the middle of the ice, and healthy water will freeze on the sides.
5. If you believe the myths, you can pierce the ice with a heated tablespoon. Sages say that sharp objects destroy energy. It all comes down to personal preference, use your own discretion. The resulting water should be consumed within 24 hours.

Method number 4. Freezing in a plastic bottle

1. This option is suitable for everyone without exception; it does not require skill or special skills. Prepare plastic bottle any volume (preferably 1 or 2 liters). Fill the containers 85% with tap or pre-filtered water and seal tightly with lids.
2. Line the freezer with cardboard or parchment paper, place water bottles in the cavity. Wait until the liquid is completely frozen, then remove the container and open the lids. Leave at room temperature until defrosted.
3. First, the liquid will begin to freeze at the edges, pour out 10% of the water. Next, you need to wait for complete thawing, and then start eating. This composition is good for health, but there is important feature. You can’t drink all the water from the bottle; salts will settle at the bottom, about 130 ml. the remaining liquid must be poured out.

There are several options for preparing structured water; we examined each of them in order. Choose the method you like and start making it a reality.

Video: how to prepare living water without a distiller

We all grew up reading fairy tales, but even now, as adults, many of us want fairy tales to become reality. And it turns out that in some cases such a development of events is quite possible, for example when we're talking about about living and dead water. Many years of research have shown that such a liquid really exists and that creating it is not so difficult. You just need to stock up on a special device that carries out electrolysis. Let's try to talk about how to make living and dead water at home?

Main features of dead and living water

So, dead water is an anolyte, a solution obtained with the help of an anode as a result of electrolysis. It is typical for such a liquid increased content acids, the presence of disinfecting, bactericidal, antifungal, antibacterial, antihistamine and anti-inflammatory qualities. Suitable mainly for topical use.

Living water is also called catholyte; its solution is obtained using a cathode during the same electrolysis. This liquid is alkaline, it remarkably activates the immune system, improves general condition, plays the role of a strong antioxidant, and normalizes arterial pressure, improves metabolic processes, etc. Can be used for systematic internal consumption.

How to make living and dead water at home?

Today on the market you can find several devices for creating living and dead water, domestic and foreign production.

Silver activator Iva-2Silver

This device is made in Russia. Manufacturers claim that it has a number of advantages, namely the presence of a silver rod of the highest standard. This device allows you not only to activate ordinary tap water, creating anolyte and catholyte from it, but also to produce high-quality silver water suitable for drinking. In addition, the Iva-2Silver device is made using a special proprietary Aquatension System technology, which allows you to increase the digestibility of water by an order of magnitude by changing its surface tension. Thanks to the presence of new electrode protection, the service life of the device has increased by an order of magnitude (compared to the previous Iva-1 model). Iva-2Silver also has a built-in timer that will help readers of Popular About Health get activated water even easier.

Significant disadvantage of this device– its cost, which starts from 5,000 rubles. However, if you wish, you can purchase a more budget-friendly device, Iva-1, which does not produce silver water, but can produce living and dead water. The cost of Willow-1 is approximately 4,000 rubles.

Melesta

This is perhaps the most budget-friendly water activator produced in Belarus. Manufacturers claim that its use allows you to obtain living and dead water quite quickly and High Quality. But such a device has a number of disadvantages.

Firstly, dead water in such a device is formed in a fabric glass, which plays the role of a diaphragm. Secondly, this device has only two electrodes, which are made of food grade steel. In addition, Melesta looks rather clumsy, although the appearance does not affect the functions. There is a significant drawback - the lack of a timer.
Although in terms of cost, such a device is very advantageous - it will cost you about 1200 rubles.

Apparatus AP-1

This is one of the most popular water activators, manufactured in Belarus. This product is characterized by high level quality, the manufacturer claims that it is made from food-grade plastic upper class. The electrodes of the device are made of especially strong favorable metals, and the ceramic glass is made of high grade clay. The AP-1 device is distinguished by its attractive appearance, it allows you to get about one and a half liters of water in just twenty to thirty minutes. Such a device consumes little electricity - like a forty-watt light bulb. Another advantage of the AP-1 device is that its anodes consist of titanium, and their surface is coated with a platinum group metal. As for the cathodes, they are made of stainless steel.
However, the cost of such a device is quite high - about three thousand rubles.

This device is mainly popular among professionals; it is used for sanatoriums, holiday homes and medical institutions.

However, PTV can also be used at home. Such a device is characterized by high quality, compliance with all electrical safety requirements, and a certificate of conformity. There is no lead in the device itself; the electrodes are made of high quality materials (food grade stainless steel and titanium). Using the PTV device, you can literally get one liter and four hundred milliliters in twenty-five to thirty minutes activated water.

One of the main disadvantages of the product is its rather high cost - about 5,000 rubles.

Do it yourself

Many craftsmen are trying to create a water activator on their own. To do this, you need to use a couple of stainless steel mugs, several syringes, a wire (cord with a plug), and also one diode.

Drill a hole in one of the mugs, screw a diode into it (6A under a load of 220W). Place both mugs on a stand made of non-conductive material. Better glue it. Connect two syringes into a U-shaped tube by cutting their tops.

Insert another syringe into the upper part of this structure (in the middle of the “P”). Fill the mugs with water and place them on the stand. Lower the structure of syringes into them so that one edge of the letter “P” goes down into one mug, and the other into the other.

HOW TO MAKE “LIVING” WATER AT HOME...

Many of us have long been accustomed to using a water filter, because in this way we, at least a little, purify tap water from various harmful impurities, and turn"dead" water into "living". But water filtrationis not the only way to make “living” water, there are many more ways that are much more effective than filtration, and we’ll talk about these methods today.

According to numerous scientific studies, it has been proven that the most beneficial water for humans is melted or structured water. You probably immediately thought about boiling, because we generally believe that boiled water is the healthiest, but this is far from true. Yes, boiling kills all harmful substances present in water, but it also contributes to the appearance of various mechanical particles in the water, as well as salts, chlorine, heavy metals and viruses. Besides, boiled water It is considered “dead” water, and such water cannot bring any benefit. So let's look for another way to structure water.

As we have already said, melt water is very useful for our body, in addition, frozen water acquires its original structure. And if we also freeze filtered water, we will get a real natural elixir of health, youth and beauty.

So, anyone who has a freezer or freezer can make melt water, and every home has a freezer. First, filter the water, then pour it into an enamel cup or pan, place it in the freezer and watch when a small ice crust appears on the surface of the water, which needs to be removed. Then wait until 2/3 of the water freezes, rinse a hole in the ice and drain the water that remains unfrozen at the bottom. Then defrost the ice, and you can enjoy clean, and most importantly, “living” water. But remember that melt water cannot be boiled and frozen again, as it will lose all its properties. beneficial features. Also, melt water cannot be stored for a long time.

There is another way to make “living” water; this method is easier to use, but no less effective. Pass tap water through a filter, and then pour a tablespoon of holy water into clean water. Thus, you will not only make the water “living”, but also sanctify it, giving it beneficial properties. It has been proven that a tablespoon of holy water can turn 5 liters of plain water into holy water.

We know about living water from fairy tales. She could heal and even revive people. It turns out that not everything in fairy tales is fiction. Living water exists. Nothing is known about reviving people, but living water can help treat some diseases and have a positive effect on everything. How to make living water at home?
Method one. Take a deep cup, fill it with water and place it in the freezer. After some time, a crust of ice will grow on top. Remove it and leave the container until completely frozen. Ready ice remove and let thaw, but not completely. When a piece of ice remains, about the size of half a glass, remove it. The remaining water is living water. Together with ice, you will get rid of harmful substances. The properties of water are also influenced by positive emotions. If you are irritated and in a bad mood, do not make water.

The second method, making living and dead water at home, requires basic knowledge of electrical engineering. If you live in a city, then first pass the water through a filter or let it settle. IN glass jar Place two stainless steel electrodes through the cover. Supply power, diode D231 or D232 to one electrode. To the other electrode - directly. Place the cathode in a tarpaulin bag. It can be sewn from a fire hose. The water in the jar should be below the edge of the bag. Plug in 220 volts, the process has begun. Do not bring to a boil under any circumstances. After a few minutes (from 5-30, depending on the strength), turn it off. Remove the bag carefully so as not to mix it with other water. This is living water, let it sit for 30 minutes and you can drink it. Shelf life is no more than two weeks. Dead water remained in the jar.

Why buy? Why expensive filters? Make living water at home yourself!

LIVING WATER at home

It's hard to believe that just 100 years ago you could safely drink water from rivers, streams and lakes without worrying about your health.

But man decided that he was more powerful and smarter than Nature and began to behave like a careless owner. The results of his activities were not long in coming - the air became harmful, and the water from most sources became simply dangerous to drink. On the surface of the Earth clean water there is none left at all.

The virgin and untouched water went deep underground, but not all of it became suitable for drinking.

Man found a way out: he came up with technologies that make it possible to purify dirty water and consume this artificial “dead” product as food.

But Nature generously did not abandon the unreasonable Man, giving him one last chance: deep underground there are springs, into the water of which Nature has laid a “memory” with the program of Health and Longevity for thousands of years. True, there are very, very few such sources left, and discovering them is considered a great success. But the main thing is that they exist!

However, most people still prefer to drink synthetic “dead” water, because there is a lot of it, and most importantly it is cheaper, not by much, but cheaper.

It’s paradoxical, but true - many people thus value their health at several silver coins.

The awareness of the negative and often irreversible consequences of one’s unreasonableness sooner or later comes to everyone, but much more often it comes too late.

How to prepare living water at home

Place an enamel pan with filtered (or regular) water in the freezer compartment of the refrigerator (on the balcony in winter). After 4-5 hours we take it out. The surface of the water or the walls are already covered with the first ice.

The water is poured into another pan. The ice that remained empty concentrated molecules of heavy water (deuterium, which freezes at a temperature of +3.8°C, while the water needed by our body is at -1°C). We throw away this first ice, which contains deuterium, and put the pan with water back in the freezer.

As soon as the water freezes by 2/3, we drain the unfrozen water - this is “light” water, it contains all the chemistry of our civilization. The ice that remains in the pan is the water we need so much. It is 80% purified from impurities and contains 16 mg of calcium per 1 liter of liquid. Now melt the ice at room temperature (not on fire) and drink within 24 hours. This is the kind of water that long-livers drink.

During the day, it is advisable to drink 2 to 3 glasses of melt water. Drink the first glass early in the morning an hour before meals, the rest during the day also an hour before the next meal. You need to store water in the refrigerator, gradually accustoming yourself to cold things.

According to many sources, melt water is a vascular agent that helps reduce heart pain and even resolve blood clots in the coronary vessels of the heart. It stops severe hemorrhoidal bleeding, relieves pain from hemorrhoids, improves blood supply after thrombosis of the lower extremities and eases the course of the disease with varicose veins. In cardiovascular patients, it significantly reduces cholesterol in the blood and improves metabolism. Melt water can serve effective means against pathological completeness. This water is good for relieving inflammation and tension in the eyes due to computer vision syndrome. I recommend putting it in your eyes.

Health and longevity, friends!