What kid doesn't love blowing bubbles! And many adults are not averse to pampering themselves with this exciting activity. But purchased balls have a drawback - their solution quickly ends, and at the most inopportune moment. Homemade soap bubbles that can be prepared for future use and stored in the refrigerator will help to avoid this.

Secrets of Successful Soap Bubbles

Surely, many have tried to prepare liquid for soap bubbles on their own, but these attempts were unsuccessful and the balls did not blow out or burst instantly. The quality of the solution depends on the soap component. It can be regular, shower gel, dish detergent, bath foam or shampoo.

In order for the bubbles to come out good, it is important that such a product has high foaming, and it contains fewer additional components - dyes and flavors.

To prepare the solution, it is recommended to use boiled or distilled water. So that soap bubbles do not burst quickly and come out dense, sugar or glycerin dissolved in warm water must be added to the liquid. It is important not to overdo it, otherwise the balls will be difficult to blow. Ideally, you should, based on the proposed recipes, choose the proportions yourself.

Recipes for making soap bubbles at home

To make soap bubbles at home, you can use one of the recipes:

• Combine 1/3 cup dish detergent with 3 tbsp. glycerin and 2 cups of water. Mix and refrigerate overnight.
• Dissolve 2 tablespoons in 2 glasses of warm water. sugar and combine liquid with 1/2 cup dish detergent.
• At 150 gr. distilled or boiled water, add 1 tbsp. sugar, 25 gr. glycerin and 50 gr. shampoo or dish detergent.
• For large soap bubbles, you can use the following recipe. Combine 5 cups of warm distilled water with 1/2 cup Fairy, 1/8 cup glycerin, and 1 tbsp. Sahara. For a greater viscosity of the solution, you can add a little gelatin soaked in water. Let stand for at least 12 hours and then use.
• Mix 1 cup of baby shampoo and 2 cups of distilled warm water. Infuse the mixture for about a day, add 3 tbsp. glycerin and the same amount of sugar.
• Strong soap bubbles come out with glycerin and syrup. With the help of a solution, you can build shapes from balls by blowing them onto any smooth surface. Prepare sugar syrup by mixing and heating 5 parts sugar with 1 part water. Combine 1 part of the syrup with 2 parts of grated laundry soap or other soapy liquid, 8 parts of distilled water and 4 parts of glycerin.
• To make colored soap bubbles, you can add a little food coloring to any of the recipes.

You can give fun and a holiday to children easily and without significant expenses. To do this, you need to independently prepare a solution for soap bubbles. The latter are one of the simplest, most exciting and fun games. It attracts the attention of not only children, but also adults. You can make a suitable composition quickly and in any volume. There are many ways to prepare it, but in any case, certain recommendations must be strictly followed so that the balls are blown easily, are large and do not burst for several seconds.

How to make soap bubbles at home

To make small and large soap bubbles at home, depending on the recipe, you will need water, soap, sugar, glycerin and some other ingredients. Almost all of them are sold in the store, unless glycerin needs to be purchased at a pharmacy. This component is fixing, because. with it, the walls of the balls will be more durable. With proper preparation and optimal composition, they will even bounce off the fingers.

In addition to glycerin, sugar syrup or gelatin can be used as a fixing agent. Professionals who organize soap shows recommend using washing powder with ammonia or polyvinyl alcohol to prepare the composition. It should be emphasized that homemade soap bubbles with glycerin will turn out to be more durable than those that can be purchased at the store.

Having decided to surprise your child on a holiday or on any ordinary day and make him a solution for soap bubbles, first prepare the right water. To prepare the composition, it is better to use bottled or boiled water, i.e. tap water is not suitable for this purpose. Distilled still water is considered a good option. To make a high-quality solution from which you can blow long-lasting non-bursting balls of different volumes, you need to take into account other recommendations:

• When choosing a soap, dishwashing detergent or powder, pay attention to the composition of the product. The less perfume additives and dyes in the product, the better the soap balls will turn out.
• Glycerin, like sugar, affects the density of the product and the strength of the blown balls. For this reason, you should not abuse this component, otherwise the solution will be too dense and the bubbles will become difficult to blow out.
• Soap balls, which are made from a less dense solution, are not as strong (i.e., they burst faster), but they are much easier to blow. This composition is most suitable for kids.
• Use warm or hot water, but not boiling.
• In the process of preparation, the components must be mixed with moderate intensity so that the foam is at a minimum. This rule is the key to the success of preparing the composition at home.
• If possible, cool and keep the finished composition in the refrigerator for 1-2 days.
• The finished mixture must be insisted for the appearance of a whole soap film on the surface without bubbles and foam. You can remove the latter yourself or wait until it disappears by itself. Cooling the liquid is the easiest way to get rid of unwanted foam.
• You can make multi-colored bubbles if you dissolve food coloring in the soap base. In order for balls of several colors to spin at the same time, it is recommended to divide the foam into different bottles and add it to each of your paints.
• It is recommended to blow soap balls slowly and evenly, otherwise the film will quickly tear.
• Wind and dust in the air have a negative effect on soap bubbles. High humidity is considered an assistant for them.

What determines the quality of the bubbles

To obtain high-quality and long-lasting soap balls, it is necessary to use only proven components. For example, in almost all recipes, a detergent such as Fairy is used as a basis - it has been tested by practice. In this case, you can use any other suitable product. Of particular importance is the degree of mixing, on which the amount of foam obtained depends - it should be as small as possible. The quality of the bubbles even depends on the tools used to blow them.

The proportion of components for the preparation of soap composition

When planning to make bubbles with glycerin, sugar and other ingredients, choose the appropriate proportion. To do this, check out the table:

	Water (distilled)	Soap base	Glycerol			dough baking powder
giant bubbles
Mix with sugar
Sugar free mix

Composition and safety rules

You can make beautiful and long-lasting soap bubbles if you put more glycerin in the composition and vice versa. It is very important to use only safe components, especially if the composition is made for a small child. For example, for a soap base, you can take a baby shampoo that does not contain any harmful ingredients. Additionally, consider the following safety rules:

• while working with the composition, you need to be careful so that it does not get into the nose, mouth and eyes;
• if splashes from bubbles still get into the eyes, then rinse them thoroughly with clean water;
• you need to blow soap balls in the direction where there are no people and animals;
• if the solution is prepared for the baby, then make sure that he does not taste it;
• after preparing the solution and experimenting with inflating balloons, be sure to wash your hands under running water.

Soap bubbles recipe at home

Today, there are many recipes that allow you to prepare a solution for creating soap bubbles in a matter of time and at low cost. It can be a classic recipe with soap, glycerin and dishwashing liquid, laundry detergent, etc. Sometimes a soap-based solution involves adding sugar. You can check the quality of the finished composition for soap bubbles as follows: inflate the balloon and touch it with a finger dipped in foam. If it turns out to be of poor quality and bursts, then add soap and a few drops of sugar syrup or glycerin.

Classic laundry soap recipe

Relatively simple but common recipe. To prepare the composition according to it, you will need only three ingredients:

• water - 500 ml;
• laundry or glycerin soap without dyes, flavors - 50 g;
• glycerin - 2 tablespoons.

A jar with the last component can be purchased at almost any pharmacy. Instructions for making a solution:

1. First, grind your soap. This can be done by finely chopping this component or grating it with a suitable size.
2. Transfer the crushed soap to any container, fill with hot water and stir until completely dissolved.
3. If the soap does not dissolve well, then first boil the water slightly - while constantly stirring it. Do not bring the solution to a boil.
4. If necessary, strain the solution through cheesecloth. After that, add a couple of tablespoons of glycerin to the almost finished composition.

With glycerin

To prepare the composition for bubbles at home, you can take a little more glycerin compared to the previous recipe. Instead of soap, prepare Fairy detergent. The number of necessary components is only three, so this recipe is one of the simplest:

• soft water (distilled, melted, boiled) - 300 ml;
• detergent "Fairy" - 100 ml;
• glycerin - 50 ml.

Find in advance a suitable container for preparing soapy liquid at home. For example, it could be some small basin. Stages:

1. Fill the basin with warm water in the required amount, but adhering to the strict proportion indicated in the list of ingredients. That is, if it is 900 ml, then the remaining components should also be 3 times more.
2. Next, pour in "Fairy" and add glycerin. Gently mix the composition, but try not to raise the foam.
3. Leave to infuse for a day in the refrigerator before use.

From dishwashing liquid

A relatively simple and affordable recipe, all the ingredients for which can be found in almost any kitchen. In this case, you do not have to wait for the soap to melt. To cheer up yourself and your children, use the following components:

• water - 400 ml;
• dish detergent - 100 ml;
• regular white sugar - 2 teaspoons.

1. First you need to dilute sugar and dishwashing detergent in warm water.
2. Then carefully place all the ingredients until a more or less homogeneous composition is obtained. Everything, the solution is ready - you can blow soap balls.

DIY soap bubbles for kids

It often happens that while playing with a child, droplets of bursting bubbles fall into the eyes. And then the entertainment is replaced by the screams and crying of the baby. The way out of the situation will be the preparation of a solution with the addition of mild baby shampoo. If it gets on the mucous membranes, such a liquid will not cause severe burning and pain - it is harmless to the baby's skin, does not contribute to inflammation and allergies. To prepare this composition at home you will need:

• water - 500 ml;
• baby shampoo - 200-250 ml;
• granulated sugar - 3 tablespoons.

The cooking process at home is relatively simple. It consists of several stages:

1. Dissolve the shampoo in the required amount of warm water and let the resulting liquid brew a little. To do this, leave it overnight or better for a day.
2. After that, it remains to add granulated sugar to the liquid for soap bubbles and mix everything thoroughly.
3. No more actions need to be performed, because. the solution is almost immediately ready for use.

There is an even simpler recipe, thanks to which your child's childhood will be filled with beautiful bubbles. You will need baby foam from the Little Fairy cosmetics collection. Mix 30 grams of the product with 100 grams of purified water. Such a recipe for creating balls at home is ideal in that you can make the composition in accordance with it almost instantly.

From washing powder

This recipe differs from others in that it may take you several days to prepare a quality solution. For this reason, if you want to please your little one right now, this option for preparing a liquid to create bubbles is definitely not for you. Of the ingredients you will need:

• water - 300 ml;
• glycerin - 100 ml;
• ammonia - 8-10 drops;
• washing powder - 20-25 g.

If you are thinking about choosing a washing powder, then give preference to a proven option that you often use. If possible, choose high-quality and safe products for health. Instructions for preparing the composition at home include the following steps:

1. Fill a suitable container with hot water. Add washing powder there and mix everything thoroughly until the latter is completely dissolved.
2. Then send the rest of the ingredients to the same container. Stir, leave the resulting soapy solution to infuse for two days.
3. At the end of the period, the liquid must be filtered, and then sent to the refrigerator for several hours, and preferably all night. After that, the solution will be ready for use.

Bubbles that don't pop with sugar

To make non-popping soap balls, you will need to supplement the usual list of ingredients with sugar. To prepare the liquid, prepare:

• water - 800 ml;
• glycerin - 350-500 ml;
• laundry soap - 200 g;
• sugar - 80 g.

First, prepare your soap. You will need to grate this ingredient on a suitable grater and pour hot water over the resulting chips. Further:

1. Stir the liquid thoroughly until the soap is completely dissolved in the water.
2. Next, add glycerin, sugar to the resulting mixture. Mix everything thoroughly.
3. As a result, you will get a solution that can be used not only to form strong balls, but also various curly bubbles, for example, by blowing them onto a smooth plane of the table.

Also try sticking to a more original recipe that includes corn syrup - this component can be replaced with sugar or glycerin if desired. To prepare at home, you will need water (600 ml), shampoo or dishwashing liquid (200 ml) and 70-80 ml of corn syrup. All that is required is to add syrup, shampoo to water, then mix all the ingredients. If the balloons are a little difficult to inflate, then add some water to the liquid.

Durable giant bubbles

If you want to make not only large, but also strong balls from a solution at home, then buy gelatin in advance. The resulting solution can be used to organize bubble shows, which are often seen at birthdays, weddings and other festive events. You can arrange such a show on any ordinary day for both children and friends. To make soap bubbles at home, you will need the following ingredients:

• water - 800 ml;
• dishwashing detergent - 200 ml;
• glycerin - 150 ml;
• granulated sugar - 50 g;
• gelatin - 1 sachet (30-40 g).

It is better to prepare liquid for the formation of giant bubbles in a wide basin. After preparing the composition, you don’t have to blow out the balls, you just need to immerse a hoop or a large frame made of flexible material into the liquid, and then gently pull out the giant bubbles. At first, it is unlikely that you will be able to form really large, beautiful balls, but with a little practice, you will be able to surprise your loved ones and friends with your skill. Step by step instructions:

1. First of all, prepare the gelatin. Soak this component in a small amount of water according to the instructions on the package. Leave to swell and then strain.
2. Mix the prepared gelatin with sugar. Melt the mixture, but do not bring it to a boil. You can do this in a microwave oven or in a water bath.
3. Add the resulting mixture of gelatin and sugar to 800 ml of warm water. Send all the rest of the ingredients there.
4. At the end, it remains to mix everything thoroughly.

Check out another recipe for preparing liquid to create giant strong bubbles. You will need to mix together glycerin, gel, dishwashing detergent. Then add distilled water (hot) and mix all the ingredients, being careful not to create foam. From such a solution, “survivable” balls will be obtained that will not burst even during contact with water. Ingredients:

• distilled water - 0.8 l;
• thick dishwashing detergent - 0.2 l;
• gel lubricant without impurities - 0.1 l;
• glycerin - 0.1 l.

How to blow soap bubbles

If you are making balls of liquid soap in the fresh air, then get ready for the fact that the final result will depend on the weather. Dust and strong winds are the real enemies of these balloons. In addition, you should not let them out on a hot and dry day when the air temperature reaches 25 degrees or more. High humidity becomes a real helper in this matter. Best results can be achieved in the morning or evening after watering the lawn or rain.

When blowing bubbles at home, try to avoid strong drafts. At the same time, the room should not be dusty, dry, hot. Please note that the balls during bursting leave marks on furniture, linoleum, parquet. Various tools are used to create them - some even use special generators. An affordable and cheap option is a factory blower stick. You can make suitable fixtures at home yourself:

• An excellent option would be a wire that needs to be twisted into a loop.
• A worthy alternative is a straw or straw for cocktails. To make the balls large, make several longitudinal cuts at the end of the tube.
• Some hobbyists use a plastic bottle that needs to be cut off the bottom, or figured molds designed for dough.
• If you do not have any devices at hand, then you can launch the balls with your fingers. To do this, fold your thumb and forefinger into a ring.
• To blow giant balloons, use a loop device that consists of two sticks. The latter are connected to each other, forming a loop. First, dip the ropes in the liquid. After that, they are bred on the sides and make movements with their help in a horizontal or vertical plane.

Video

You can spend a quiet evening of experiments, you can have a fun competition, or you can have a noisy pampering for kids ... By the way, how many adults can walk past children blowing soap bubbles and not show "class"?

What is important to know in order to make soap bubbles at home Good?

Of course, the main thing is the solution and what sticks (tubes, frames) for soap bubbles you use. Below we give 7 recipes for soap bubble solution. You can choose the one that suits you best, but do not be surprised: you may have to "tailor" it to your conditions. Let some helpful tips help you.

The main secret of success!

The main condition for preparing a good solution is the use of high-quality water. If the water is too hard, the solution will be of poor quality: the bubbles will be small or they will not be blown out at all. We advise you to take drinking non-carbonated or filtered water. Good solutions are obtained on boiled or melted water. By using good water, you multiply your chances of success many times over!

Useful tips for those who make soap bubbles at home:

• The less impurities (perfume and other additives) in the soap or other detergent used to prepare the liquid, the more reliable the result.
• How to make the solution denser, and the quality of the bubbles better? To do this, use glycerin or sugar dissolved in warm water.
• The main thing is not to overdo it with glycerin and sugar, otherwise it will be difficult to blow bubbles.
• A less dense solution forms less stable bubbles, but they are easier to blow out (suitable for babies).
• Many bubble buffs advise letting the solution sit for 12 to 24 hours before drinking.
• At the start, before blowing the bubble, you need to wait for a clean solid film (on which you will blow), without additional small bubbles around the edges that sometimes occur. Bubbles must be carefully removed or wait until they disappear. And in general, it is desirable to avoid foam: insist, cool the liquid for soap bubbles - if only there was less foam.
• Wind and dust in the air are not helpers for soap bubbles.
• High humidity is a helper.

Solution for soap bubbles: recipes for all occasions

Classic solution of soap bubbles according to GOST

It was this recipe for soap bubbles that was used according to GOST to prepare a solution during our childhood.

Ingredients:

• Purified water - 100 grams
• Laundry soap or glycerin (unflavored) - 10 grams
• Glycerin pure - 20-30 grams

Cut or rub soap. The soap should completely dissolve. Flavored soaps cannot be used, it is necessary to use household or pure glycerin without additives. Strain the solution through cheesecloth.

Add glycerin to the mixture. First you need to add 20 grams, and try to blow bubbles, and if they do not work out, another 20 - 35 grams of glycerin is added to the mixture. Glycerin is needed in its pure form - the cream cannot be used. It’s hard to do without glycerin - the bubbles will turn out to be “dry”, which will make them burst faster.

Recipe 1, simple: soap bubbles from dishwashing liquid

You will need:

• 1/2 cup dishwashing liquid
• 2 glasses of water
• 2 teaspoons of sugar

Mix all ingredients thoroughly. Ready!

You can use a similar composition, where glycerin is used instead of sugar:

• 2/3 cup dishwashing liquid
• 4 glasses of water
• 2-3 tablespoons of glycerin.

Thoroughly mix all the ingredients and put the mixture in a cool place for 24 hours. Glycerin can be purchased at any pharmacy.

To do colorful soap bubbles , add food coloring to the mixture (2-3 teaspoons for the entire volume or divide into parts to make bubbles of different colors).

Recipe 2, for the little ones: how to make soap bubbles from baby shampoo?

You will need:

• 200 ml baby shampoo,
• 400 ml of distilled (boiled, melted) water.

This liquid should be infused for a day, after which you should add:

• 3 tablespoons of glycerin or 6 teaspoons of sugar.

Recipe 3, Fragrant: Bath Bubbles

You will need:

• 3 parts bath foam
• 1 part water.

Recipe 4, original: soap bubbles with syrup

You will need:

• 2 cups dishwashing liquid
• 6 glasses of water
• 3/4 cup corn syrup

Recipe 5, cheap and cheerful: solution for soap bubbles from laundry soap

You will need:

• 10 glasses of water
• 1 cup grated laundry soap
• 2 teaspoons of glycerin (or a solution of sugar in warm water, you can - with gelatin).

You can get by with a combination of water and soap without additional additives (for example, if there is simply no glycerin). Soap grated on a grater should be poured into boiled water, and hot, and stirred to full soap dissolution. If the dissolution is difficult, you can slightly warm the mixture with continuous stirring. Do not bring to a boil!

And if you do not want to grate laundry soap, then use this composition:

• 100 ml liquid soap
• 20 ml distilled water,
• 10 drops of glycerin (after the foam settles, i.e. after about 2 hours. It is better to infuse the liquid in a cold place).

Recipe 6: extra strong soap bubbles for experimenters

You will need:

• 1 part concentrated sugar syrup (proportion: to 1 part of water 5 parts of sugar: for example, for 50 g of sugar - 10 ml of water),
• 2 parts grated soap
• 4 parts glycerin
• 8 parts distilled water.

With this solution, you can, for example, build various figures from soap bubbles by blowing them onto a smooth table surface.

Recipe 7: giant soap bubbles for a children's party

You will need:

• 50 ml glycerin,
• 100 ml dishwashing liquid,
• 4 teaspoons of sugar
• 300 ml of water.

A solution for giant soap bubbles can be prepared in a basin, and they are “blown out” using a gymnastic hoop or a frame specially twisted from a flexible material. Honestly, you don’t have to blow - rather, you have to wave the frame or slowly pull a large, strong bubble out of the basin.

What to blow? Tubes/frames/sticks for soap bubbles

As sticks for soap bubbles, you can use tubes of different diameters, frames, cocktail sticks (especially with a cross-shaped or fringed tip and bent “petals”), hollow blades of grass or pasta, dough cutters, funnels, you can buy at the store special guns for soap bubbles or just blow them through your fingers!

And if you are invited to a real soap bubble festival or arrange one for yourself, you can make original stick-frames with your own hands from wire and colored beads, for example, these:

Another original idea - use it to blow large soap bubbles ... plasticnew bottles !

If you have your own ways to make soap bubbles at home or articles on the topic (especially with photos!) - please share them in the comments!

Perhaps each of us remembers how in childhood we loved to blow big and bright soap bubbles that were blown out of a straw.

How cool was it to run and catch them?

And then be upset that the bubbles ran out so quickly?

We even tried to make them ourselves then, but for some reason nothing worked out for us.

Why? Let's try to figure out how soap bubbles are made correctly, because sometimes you really want to return to childhood and enjoy all sorts of trifles so carelessly.

How to make soap bubbles at home: tricks of rainbow bubbles

Of course, the main "ingredients" for cooking are the solution itself and the sticks through which we will release soap bubbles. Below are the 5 most common recipes for their preparation, but they are not final, you can choose some points according to your capabilities and conditions. But first, some bubble making tips at home.

1. To create it is better to use boiled water, and the best solution would be to use distilled water.

2. The final result will depend on the total number of impurities (perfumes, etc.), the less they are in soap or other product, the better.

3. In order for the prepared solution to be denser and the bubbles to be of better quality, it is recommended to use sugar or glycerin dissolved in warm water. However, it is important not to overdo it with them, as excess sugar or glycerin can interfere with blowing bubbles.

4. If the solution is not dense enough, the bubbles will also be less stable. But there is also a positive point - they are easier to blow out, which is good for children.

5. For maximum end results, many people recommend letting the solution sit for about 12-20 hours before using it.

6. Before you start blowing bubbles, it is advisable to wait for a solid film (you will blow on it) without extra small bubbles at the edges, which can periodically occur. Ideally, it would be to remove the foam altogether: for this, the liquid needs to be insisted and cooled, this will help to get rid of foam formations as much as possible.

7. It is very difficult to blow bubbles in windy weather and dust in the air, but if the air humidity is increased, this is definitely a plus.

How to make bubbles as strong as possible

For the best strengthening of the mixture, you need mix water, glycerin and shampoo. For this, two tablespoons of glycerin and 100 ml of water will be enough. Such a small amount will in no way interfere with the creation of excellent bubbles, but, on the contrary, will strengthen them, and after blowing they will not burst for a long time.

Use a standard straw, which is in any home, for example, from a cocktail. Then dip its solution with soap or shampoo and blow a bubble. There is a great way to check if you did everything right. To do this, dip your finger into the solution and try to break through the bubble. If you managed to do this, then the solution is not yet ready, and you still need to add soap to it.

How to make soap bubbles at home: what tools to use

We have already dedicated you to some of the secrets of making cool soap bubbles, now you need to familiarize yourself with the correct technique for blowing them. Actually, for starters, take the most ordinary plate and some flower or figurine or any other small object, also prepare a watering can.

First you need to pour a little solution into a plate and put any object in the middle, cover it all with a watering can and try to blow a bubble. So you get a wonderful soapy hemisphere, in the very center of which the very object will be located. To be honest, it's a mesmerizing sight.

To create bubbles, you can use a regular ballpoint pen. If you have a desire to surprise your baby, try to prepare "viscous" bubbles. This is how large bubbles are made.

To make a solution for these gooey bubbles, prepare the following ingredients: dish detergent, water, and one tablespoon of sugar. We will talk about recipes a little later, because these and other ingredients can be combined in various proportions, depending on the desired end result.

Children for joy

If your house is always noisy and your kids are constantly asking for new things to do, you can give them a little competition to see who can blow the bubble the fastest and the biggest. Blowing soap bubbles has pleased children and their parents for many years, but not everyone can do them. In principle, the solution is made quite simply, and it is not at all expensive, so you can please your baby at least every day.

How to make soap bubbles at home: recipes

To blow the largest possible soap bubbles, you will need to prepare special equipment. In our opinion, the best option would be to build a large circle of strong wire. Thus, we get such a lasso with which we can dip it in a bucket of solution and inflate a large soap bubble.

In principle, you yourself can prepare the necessary device to your taste. The only thing is to be careful with soap bubbles, because they can easily get into your eyes. If this happens, rinse your eyes with water immediately. In fact, there are a large number of devices with which you can create soap bubbles. But even with such a harmless way of having fun, you need to be careful. Be careful not to get the bubble in your eyes. If this happens, just rinse it with water.

So, here we come to the main thing, directly to the recipes themselves. You can choose any to your taste.

Recipe #1. Take some dish detergent (for example, Fairy), glycerin (it is sold in all pharmacies) and water, preferably boiled. Detergent is needed in order to give our bubbles brightness, and glycerin will make them stronger.

Manufacturing process: pour 200 g of detergent into the dishes, add 100 ml of glycerin to it and dilute it all in 600 ml of water. The resulting mixture must be mixed well and voila! .. you can inflate!

Recipe #2. This recipe is quite simple, you need to take water and dishwashing detergent. The ingredients must be selected in the following ratio: 30 ml of detergent per 100 ml of water. Then just mix the solution - and you're done!

Recipe #3. This recipe is more complicated than the first 2, so it will take a little more fiddling with it.

To prepare it, you need: 300 ml of glycerin, 50 g of washing powder, 20 drops of ammonia and 600 ml of hot water. Pour all the ingredients into one bowl, and even better in a jar and mix well. Next - an important point! The resulting mixture is left and insisted for 48 hours, and more. Then we filter everything through cheesecloth and put in the refrigerator for 12 hours. Despite the time costs, the result will pleasantly surprise you - the process is completed!

Recipe #4. This recipe is even more complicated than the previous one and all the others, although in truth the bubbles won't be any better, they will be about the same quality. To prepare it, you need to take: laundry soap (1 pc.), Hot water (400 ml), sugar (2 teaspoons).

It is prepared as follows: take a bar of soap and rub it on a coarse grater. Then pour shavings from the soap with hot water and put to simmer over low heat and leave to dissolve, from time to time not forgetting to stir. The resulting solution must be cooled and refrigerated for 6-7 days. After a week, add sugar to the mixture and mix. After dissolving the sugar, the soap bubbles are ready! To strengthen the blisters, it is also recommended to add a couple of drops of glycerin.

Recipe number 5. One of the simplest options. To prepare this recipe, you only need bath foam and boiled water. The strongest and most visually beautiful bubbles can be obtained from Little Fairy foam or other products of similar composition. All you need to do is mix bubble bath and water in a ratio of 3 to 1 - and go ahead, please the kids!

And finally, we offer you a list of tools that can be used to blow soap bubbles.

Cocktail tube or ballpoint pen, from which the stem and caps were previously removed. However, if you want to blow large bubbles, then these options are definitely not suitable.

For larger bubbles, make 4 small 3 cm cuts at one end of the cocktail tube. Next, expand the incisions in different directions to make it look like on flower petals.

It is also a good option to use a rigid wire, one end of which is bent in the form of a loop with a diameter of 4 cm.

However, if you want to get the largest possible bubbles, you simply cannot do without a funnel, through which you can blow bubbles up to 25-30 cm in diameter. However, do not forget that you will need to blow into the funnel several times, first plugging the hole into which you will blow, otherwise nothing will work out. Such a funnel can also be handmade from paper.

Blowing soap bubbles is a very interesting game, and your child will no doubt be delighted! As you can see, there are very simple recipes for making them, all it takes is a little time and some simple ingredients. Put in a little effort and you will see the eyes of a happy child - what else do parents need to be happy?

Soap bubbles are always a joy, especially for young children. But purchased jars quickly run out, sometimes they accidentally spill, and they are not cheap. Learn how to make soap bubbles yourself! At home, you can prepare a whole jar so that the holiday is always there. To prepare strong bubbles, you need very little: glycerin, a few secret ingredients and a good mood.

Glycerin and other secret ingredients

In almost all recipes for making soap bubbles, there is a “fixing” component - glycerin. With it, the walls of the bubble become strong, it does not burst for a long time, with a good composition and proper preparation, it even bounces off the fingers.

In addition to glycerin, gelatin and sugar syrup have fixing properties. Soap show professionals recommend using polyvinyl alcohol or washing powder with ammonia in the preparation.

In almost all recipes, the Fairy detergent is taken as a soap base, stipulating that anything is possible, but Fairy is better - it has been tested by practice.

In order for a small child to blow bubbles, it is important not to overdo it with glycerin, otherwise the mixture will turn out to be too strong.

Some useful tips for making soap bubbles delight you:

1. Soap bubbles are made with soft water, so unboiled tap water is not recommended. It is advisable to prepare the mixture with distilled or boiled water, or with melted water.
2. If you are making bubbles for a child, use only safe ingredients. For example, take baby shampoo as a soap base.
3. The water should be warm or hot, but not boiling.
4. During cooking, stir the ingredients with moderate intensity to form as little foam as possible. This rule is the key to success.
5. The finished mixture is recommended to insist from 12 hours to a day for the appearance of a solid soap film on the surface.

Table of proportions of components for the preparation of soap composition

The table shows the proportions of the components of the soap mixture for bubbles. Let's say in the last recipe you take a jar of glycerin as a unit, then half a jar of gelatin will be required, and detergent - 2 jars.

How to make a mixture for different bubbles at home

There are a lot of recipes for making soap bubbles, since usually successful mixtures are obtained empirically.

A simple recipe with a minimum of ingredients

It only takes three ingredients to make it:

• soft water (boiled, melted or distilled) - 300 ml;
• detergent "Fairy" - 100 ml;
• glycerin - 50 ml.

Cooking process:

1. Pour the required amount of warm water into the bowl.
2. We add Fairy.
3. Add glycerin.
4. Mix everything gently without raising foam.
5. Leave to infuse in the refrigerator for 24 hours.

The mixture is ready, you can blow bubbles.

An easy way to make soap bubbles - video

Recipe using sugar and baking powder

We use the following components:

• distilled water - 300 ml;
• soap base - 50 ml;
• glycerin - 25 ml;
• granulated sugar - 5 teaspoons;
• baking powder - 1 teaspoon.

The process of preparing a mixture for soap bubbles:

1. Pour sugar and baking powder into the bottom of the container.
2. Add glycerin.
3. Pour in the detergent.
4. Fill all components with water.
5. Mix thoroughly without foam and leave to infuse for 12 hours.

After the soap film has become dense and solid, the bubbles are ready.

Soap bubbles with sugar - video

giant soap bubble recipe

Ingredients and their proportions:

• distilled water - 400 ml;
• dishwashing detergent "Fairy" - 100 ml;
• glycerin -75 ml;
• sugar - 5 teaspoons;
• gelatin - 5 teaspoons.

Cooking process:

A mixture made according to this recipe produces large and strong bubbles.

A little secret from professionals. If you take bath foam as a soap base, then your bubbles will also have a pleasant smell.